Characteristics

"WILSONTAYLOR ALLOY III" anodes are cast from special aluminium alloys developed by Wilson Taylor. Suitably formulated for specific application they are characterised by lightweight, smooth corrosion patterns, high electrical capacity and stability. Fewer anodes may be used for a given installation compared with other materials and a substantially lower cost per installed system is acheived.

Materials

Alloys specially designed for different applications. "WILSONTAYLOR ALLOY III" anodes are cast in alloys of aluminium and indium plus additions and have been developed specifically for use in sea-water. The materials are very stable and efficient even in electrolytes of varying conductivity and temperature. In normal sea-water having resisitivity of about 25 ohm cm, approximately 2700 amphere hours of current are provided by each kilogram of alloy which will maintain a potential of -1100 mV when measured against silver/silver chloride reference half cells.

Product Range

Wilson Taylor specialises in designing and producing anodes to meet any individual requirement and make their own moulds to do so. Thereby they ensure both the optimum solution to each problem and total control over the quality of the finished anodes.

Application

"WILSONTAYLOR ALLOY III" anodes are suitable for a wide variety of applications including the hulls and tanks of ships, fixed offshore structures, semi submersibles, pipelines & jetties, etc.